Numerical simulation of oscillatory flow and heat transfer in the heat exchangers of thermoacoustic systems

Olusegun M. Ilori, Xiaoan Mao, Artur J. Jaworski

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

1 Citation (Scopus)

Abstract

The design of appropriate heat exchangers is an essential requirement for the development of next generation of thermoacoustic systems. In this study, RANS method with SST k-? turbulence model was applied to solve the time-dependent turbulent Navier-Stokes and energy equations for oscillating flow and heat transfer conditions in three individual but similar parallel plate heat exchangers, arranged in series and positioned in an oscillating helium gas environment. The numerical code is validated by comparing the low amplitude oscillating flow results to the analytical solutions found in the literature. The effects of pressure oscillation on the velocity and temperature distributions are discussed in detailed with respect to the channels' entrance and exit edge shapes of the heat exchangers. Three types of edge shapes, blunt, cone and ogive, in this study influence the oscillating flow behaviour and heat transfer condition differently at the entrance and exit of the heat exchanger channels.

Original languageEnglish
Title of host publication24th IIR International Congress of Refrigeration, ICR 2015
PublisherInternational Institute of Refrigeration
Pages1308-1315
Number of pages8
ISBN (Electronic)9782362150128
DOIs
Publication statusPublished - Aug 2015
Externally publishedYes
Event24th IIR International Congress of Refrigeration, ICR 2015 - Yokohama, Japan
Duration: 16 Aug 201522 Aug 2015

Publication series

NameRefrigeration Science and Technology
ISSN (Print)0151-1637

Conference

Conference24th IIR International Congress of Refrigeration, ICR 2015
Country/TerritoryJapan
CityYokohama
Period16/08/1522/08/15

Cite this