Prototype wireless sensors for monitoring subsurface processes in snow and firn

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)

Abstract

The detection and monitoring of meltwater within firn presents a significant monitoring challenge. We explore the potential of small wireless sensors (ETracer+, ET+) to measure temperature, pressure, electrical conductivity and thus the presence or absence of meltwater within firn, through tests in the dry snow zone at the East Greenland Ice Core Project site. The tested sensor platforms are small, robust and low cost, and communicate data via a VHF radio link to surface receivers. The sensors were deployed in low-temperature firn at the centre and shear margins of an ice stream for 4 weeks, and a bucket experiment’ was used to test the detection of water within otherwise dry firn. The tests showed the ET+ could log subsurface temperatures and transmit the recorded data through up to 150 m dry firn. Two VHF receivers were tested: an autonomous phase-sensitive radio-echo sounder (ApRES) and a WinRadio. The ApRES can combine high-resolution imaging of the firn layers (by radio-echo sounding) with in situ measurements from the sensors, to build up a high spatial and temporal resolution picture of the subsurface. These results indicate that wireless sensors have great potential for long-term monitoring of firn processes.
Original languageEnglish
Pages (from-to)1-10
JournalJournal of Glaciology
DOIs
Publication statusPublished - 18 Oct 2018

Keywords

  • glaciological instruments and methods
  • snow/ice surface processes
  • 0406 Physical Geography And Environmental Geoscience
  • melt-surface
  • Meteorology & Atmospheric Sciences
  • polar firn

Fingerprint

Dive into the research topics of 'Prototype wireless sensors for monitoring subsurface processes in snow and firn'. Together they form a unique fingerprint.

Cite this