Skip to main navigation Skip to search Skip to main content

The Design of Masonry Panels Subjected to Transverse Lateral Loading

  • J. N. Tutt

Research output: Types of Thesis › MPhil Thesis › peer-review

Abstract

Research into the factors affecting the strength of nonvertically loadbearing masonry panels subjected to lateral wind loading is reviewed and discussed, with particular reference to cavity walls. Design guidance published in international codes of practice and standards, and the various methods of analysis and design which have been proposed for laterally loaded masonry are also reviewed and discussed.
An experimental programme to establish values for the elastic properties of three different types of metal cavity wall ties is described, A total of 51 separate experiments have been carried out on 57 brick couplet specimens, each containing a single wall tie. The elastic properties thus obtained are used to carry out a programme of finite element analyses on two masonry cavity wall formats using plate bending and beam elements to represent the masonry and wall ties respectively, It is believed that this technique has not previously been used in this manner, In all, 22 separate analyses have been carried out on cavity walls and a further 16 analyses on single leaf walls. Different elastic constants are used for the masonry in the different analyses to represent various types of masonry. The elastic constants used are based upon the published research referred to above.
The effects on the results of the finite element analyses of varying the elastic properties of the wall ties and the masonry are discussed. The results of the analyses are compared with published experimental results. The behaviour and strength of wall ties are also compared with published experimental results.
Finally it is proposed that a serviceability design check should be carried out on laterally loaded masonry walls, in addition to the ultimate limit state design in BS 5628. Guidance is given on the proposed serviceability design method using bending moments obtained from simple elastic plate bending theory.
Original languageEnglish
QualificationMaster of Philosophy
Awarding Institution
Award date31 Mar 1983
Publisher
DOIs
Publication statusPublished - Mar 1983
Externally publishedYes

Bibliographical note

Collaborating Establishment - Jenkins and Potter

Cite this