Towards safe inspection of long weld lines on ship hulls using an autonomous robot

Tariq Sattar, Michael Corsar, Rachel James

Research output: Contribution to conferencePaperpeer-review

Abstract

Inspection of ship-hull welds must be carried out in accordance with classification society guidelines during manufacture and when in service. Failure of ship-hull welds can result in the loss of a vessel, loss of life and pollution of the environment. Typically weld lines are inspected using ultrasound NDT techniques which are labour intensive, expensive and often hazardous to operators. To remain competitive shipbuilders and inspection companies need to reduce costs while maintaining or improving inspection quality. Automated inspection can achieve this, but current systems are complex, expensive and not suited to shipyard operation. AWI is a novel robotic autonomous system (RAS) that uses magnetic adhesion to climb ship hulls and autonomously track weld lines while performing ultrasonic scans of the welds. Communication of the inspection data is transmitted wirelessly to the inspector sited remotely. This addresses a key challenge in overcoming the payload limitations of current climbing robots. Therefore, AWI is equipped with rugged, fast and secure wireless communications, which robustly integrates with the robot hardware for industrial service.
Original languageEnglish
Publication statusPublished - 10 Sept 2018
Externally publishedYes
Event21st International Conference on Climbing and Walking Robots (CLAWAR 2018) -
Duration: 9 Oct 2018 → …

Conference

Conference21st International Conference on Climbing and Walking Robots (CLAWAR 2018)
Period9/10/18 → …

Keywords

  • Wall Climbing Robot
  • Autonomous Weld Inspector
  • Automated ship hull Weld inspection
  • Autonomous Weld Inspection robot

Fingerprint

Dive into the research topics of 'Towards safe inspection of long weld lines on ship hulls using an autonomous robot'. Together they form a unique fingerprint.

Cite this